Wolfcamp Delaware: an assessment of recent activity with a GIS approach

October 23, 2017


Authors: Veronika Akulinitseva & Roman Boros, Senior Analysts

Publisher: Oil & Gas Financial Journal

Despite the collapse in oil prices witnessed in the second half of 2014 and a persisting low oil price environment ever since, light tight oil (LTO) production in the United States has remained rather resilient and proved its commerciality even in the sub-60 USD/bbl price environment. Although the average production of light oil exhibited a decline for the first time last year, reaching the bottom of 4.74 million bbl/d in the third quarter of 2016, production in the Permian Basin continued to show a growing trend. In 2017, Permian Midland and Delaware are set to add ~500 thousand bbl/d of oil supply to the market. Operators in both shale plays have shifted their focus to developing their best acreage positions and optimizing completion techniques, which proved to lead to continuous improvements in drilling efficiency and well performance.

Since 2013, increasing completion intensity has become a major trend, as producers in Permian aimed to boost well configuration through drilling longer laterals, increasing proppant loading and experimenting with the proppant composition and frac fluid type. Permian Delaware, in particular, has exhibited a notable increase in proppant intensity as proppant loading has doubled since 2014, surpassing the level of 2,000 pounds per foot on average in the first quarter of 2017.

Figure 1 shows a proppant intensity heat map for Delaware wells targeting Wolfcamp zones. The selection is based on 1,200 wells with at least one year of production data and full completion data disclosure. We observe that while proppant intensity is mostly distributed within the range of 1,000 – 2,000 pounds per foot, there seem to be operators that experiment with monster completions, pumping more than 2,500 pounds of proppant per foot. The tests are concentrated in the southeastern area of Reeves County; however, extreme levels of proppant loading are also observed in various sweet spots across other counties of the Delaware Basin.

Over recent years, higher proppant intensity has proved to lead to the increase in well productivity. This has caused operators to continue to experiment with proppant loading in a hope to achieve even better well results while keeping well economics attractive enough amid depressed frac sand prices in 2015-2016. 

Figure 2 illustrates that further increases in proppant intensity do not necessarily result in significantly improved well productivity. The most impressive production results, with over 50 barrels per foot, are mostly seen in the areas where proppant loading has been in the range between 1,000 – 2,000 pounds per foot. Better overall results can be seen in the northern part of Reeves, as well as in Loving and Culberson counties. Eddy and Lea counties are also among the areas with higher well productivity, despite significantly fewer wells drilled there compared to the other core counties mentioned.

Looking at the wells drilled across Permian Delaware, we can observe another interesting trend – the dependence of the variability in the light oil content on the area targeted.

Figure 3 presents a split of all Wolfcamp wells in the selection by the first year Gas-to-Oil ratio (GOR), which is a ratio of gas production to combined crude and condensate output during the first year of production of the well. We observe that most wells drilled in the Culberson County have a GOR of more than 9,000 cubic feet per barrel. Light oil content of the wells increases as we move to the northern part of Reeves and further to Loving and Winkler counties. In general, the lowest GOR is more common for the southern and eastern parts of the formation. Thus, wells in the southern part of Reeves, for example, exhibit a GOR of less than 3,000 cubic feet per barrel compared to the northern part, where GOR is mostly within the 3,000 – 6,000 range.

Eventually, the increasing commerciality of the wells is the ultimate goal that operators are striving to achieve by experimenting with completion techniques to boost well productivity and targeting the best areas of the acreage.

Figure 4 shows the distribution of wellhead breakeven oil prices across the Wolfcamp formation in Permian Delaware for our selection of wells. We clearly see that the wells in Culberson, parts of southern Reeves, and Loving counties in Texas, together with Eddy and Lea counties in New Mexico, demonstrate the highest commerciality in the shale play. The wells drilled in these areas, to a large extent, exhibit wellhead break even oil prices of under 40 USD/bbl. As we move to the lower part of Wolfcamp formation, into southern Reeves, Ward, and Pecos counties, the breakeven price range significantly increases, with many wells having wellhead BE oil prices of 70 USD/bbl and above. 

For link to article, click here.

###

Article Contact

Contact: Veronika Akulinitseva, Senior Analyst
Phone: +47 24 00 42 00
veronika.akulinitseva@rystadenergy.com

Contact: David White, Marketing Manager
Phone: +47 24 00 42 00
david.white@rystadenergy.com

About Rystad Energy

Rystad Energy is an independent oil and gas consulting services and business intelligence data firm offering global databases, strategy consulting and research products.

Rystad Energy’s headquarters are located in Oslo, Norway. Further presence has been established in Norway (Stavanger), the UK (London), USA (New York & Houston), Russia (Moscow), Brazil (Rio de Janeiro), as well as Singapore and Dubai.